Articles > Blade for the MTZ and T-150 tractor
BLADE on MTZ and T-150 TRACTOR
21.10.2019
First of all, the blade should not damage the road or concrete surface, but it should be versatile and reliable enough to last as long as possible.
In the meantime, there is no need to know about it. ”
Externally, the dumps are quite similar. But this is only outwardly.
Before you buy a blade for the MTZ tractor, T-150, please analyze the following points:
1. Bracket for fastening push rods
2. Longitudinal push rods
3. Blade
4. Blade blade
6. Hydraulic cylinder
Let's do this using the example of a tractor bulldozer blade manufactured by LLC Apostolovagromash.
In the meantime, there is no need to know about it. ”
The push rod mounting bracket is securely attached to the tractor frame and the transmission case, which additionally strengthens the connection point and more evenly distributes the load to the honey with the bearing parts. Since the hinge of the connection with the push rods is low enough, during operation there is no significant moment that unloads the front wheels and the tractor's controllability is not lost.
The longitudinal push rods and the cross member are made of a light and fairly rigid rectangular pipe, pivotally connected with the mounting brackets by means of easily dismantled pins. This design provides easy mounting of the blade on the tractor, the required rigidity and reliability.
In the meantime, there is no need to know about it. ”
In the meantime, there is no need to know about it. ”
The blade with a working width of 2500 mm (1800 mm. Grader blade + 2 plates of 350 mm for snow removal) has a height of 700 mm. The grader blade is made of structural steel with a thickness of 6 mm and is additionally reinforced with stiffening ribs, which guarantees its long-term reliable operation without violating the geometric parameters. The working surface of the blade is designed specifically for these tractors and allows to carry out the technological operation with the lowest possible resistance, which is guaranteed to reduce fuel consumption.
Attached 40mm thick reinforced rubber will allow you to work neatly without damaging the asphalt or concrete pavement.
The design-provided change in the blade rotation angle through a simple changeover expands the scope of its application, allowing not only to move the material or level the site, but also to shift the material to the side, which is indispensable when clearing snow or leveling dirt roads.
Blade blade - sectional made of steel 65G (used for grading operations and cleaning dense snow cover, ice crust, ice) strong and durable. If the knife breaks due to collision with a hard obstacle, it is necessary to replace only the damaged part of it, which simplifies the repair and does not require large expenses.
The hydraulic cylinder is applied with a proper margin of force, which makes it possible not only to easily lift the plow filled with soil or snow, but also, if necessary, create sufficient force for its forced deepening.
The design of the blade of the tractor, manufactured at the enterprise LLC "Apostolovagromash", allows grading the soils (leveling, transferring, cleaning, etc.), as well as clearing the roadways, streets, roads and paved sidewalks from snow. Can be used for cleaning grain currents and livestock farms.
The blade is easily controlled from the tractor cab by connecting it to the standard hydraulic system.
We hope that after reading the article it will become a little easier for you to make your choice and,
as a result, buy a reliable and inexpensive blade (shovel) which is intended:
for tractors MTZ and T-150
for municipal and agricultural work
for cleaning the territory, removing snow, leveling soil, sand, silage, manure
the price of which is minimal
In the meantime, there is no need to know about it. ”
Articles > Blade for the MTZ and T-150 tractor