Shredder KP-6-720 P / Universal chopping roller
Shredder KP-6-720 P
A unique chopping roller from the manufacturing plant "Apostolovagromash" is an effective processing of plant (crop) residues into nutrients! Foldable design. Highest quality.
The grinder section is water-filled , it is possible to add 200 liters of water to each section, which will increase the weight of the roller by 600 kg.
In the meantime, there is no need to know about it. ”
Additional equipment for the chopping roller (shredder):
In the meantime, there is no need to know about it. ”
execution with staggered knives is possible;
the roller is equipped with cable guides, cable diameter 10 mm;
the roller frame can be equipped with ring-toothed and
ring-spur roller, so you can purchase a section of the roller and, depending on the need, use a roller of different configuration;
it is possible to add 150 liters of water to each section, which will increase the weight of the roller by 450 kg.
In the meantime, there is no need to know about it. ”
In the meantime, there is no need to know about it. ”
In the meantime, there is no need to know about it. ”
MAIN CHARACTERISTICS
CUTTER ROLLER (CHOPPER):
• capture width - 6 m
• knife diameter - 720 mm
(from other manufacturers up to 460 mm);
• pipe diameter - 490 mm
(from other manufacturers up to 220 mm)
• weight - up to 1900 kg
(from other manufacturers up to 1700 kg);
• the knife is made of steel 65 G;
• the knife is sharpened using plasma cutting technology, which ensures the hardening of the knife edge to a depth of 7 mm;
• double-sharpened knives.
In the meantime, there is no need to know about it. ”
BEFORE YOU BUY A CUTTING ROLLER
IT IS NECESSARY TO CONDUCT DESIGN AND MATERIALS ANALYSIS
At the grinder-roller from "Apostolovagromash":
• the frame of the chopping roller is made of 120x120x8 pipe
(wall thickness 8 mm) (for other manufacturers 100x150x6, wall thickness 6 mm);
• In the 120x120 pipe, the wing pin mounting bushings increased to 80 mm are installed;
• wing toe made of heat-treated 45 steel, toe diameter 50 mm
(from other manufacturers 40 mm);
• the cheeks on the wing are made of 25 mm thick sheet, respectively, there are increased
along the length of the sleeve to hold the wing pin (other manufacturers use a 16 mm sheet);
• half-shafts for transport wheels are made of 80 mm circle and welded into the wing struts
(from other manufacturers from a circle of 60 mm and screwed with nuts, which weakens the structure).
In the meantime, there is no need to know about it. ”
With "APOSTOLOVAGROMASH" it will be easier for you to make your choice and buy a chopping roller (shredder of plant residues) cheaply with factory quality and a guarantee
In the meantime, there is no need to know about it. ”
Chopping roller-chopper KP-6-720P from "Apostolovagromash" is intended for crushing plant residues after sunflower, corn, rapeseed, grain crops, vegetable crops. Plant residues are crushed and remain on the soil surface (partial mulching), and this provides additional loosening, mixing and leveling of the soil.
In the meantime, there is no need to know about it. ”
The Apostolovagromash shredder is manufactured on the basis of a KP-6 roller . On its frame, you can install the sections of the ring-toothed and ring-spur roller
In the meantime, there is no need to know about it. ”
DISTRIBUTE REMAINS EQUALLY
Make sure your equipment is properly set up to handle crop residues.
Strive for an even distribution of residues. Pay attention to chopping and spreading systems for proper adjustment and operation, especially when harvesting conditions change.
In the meantime, there is no need to know about it. ”
Chopping, breaking and chopping the stems and distributing them evenly will help the stems naturally decay quickly and will speed up the decomposition process. A normal chopper roller will chop up crop residues and level and compact the soil at the same time.
In the meantime, there is no need to know about it. ”
In the meantime, there is no need to know about it. ”
MANAGE YOUR RESIDUES BY TILLING
The sooner crop residues close to microbial decomposition are obtained at higher temperatures, the faster the return of nutrients to the soil will take place.
Residues that do not enter or come into contact with the soil in the fall usually take longer to decompose.
In the meantime, there is no need to know about it. ”
In the meantime, there is no need to know about it. ”
TEST THE SOIL AFTER HARVESTING
Thus, the use of universal agricultural rollers (which are aggregated with MTZ tractors) allows increasing soil productivity in a natural way. And simple methods of soil testing help to understand what equipment, fertilizers and processing should be used on certain fields of farmers, agrarians and landowners.
In the meantime, there is no need to know about it. ”
